C & Z Purlin
C & Z Purlin
C & Z purlins are revolutionary products which have been technically approved and accepted all over the world by architects and engineers. Its extraordinary shapes increase its strength and load taking capacity. Usage of Z purlins results in cost saving up to 50% in structural steel as compared to traditional rolled section (Like Angle / Channel / Beams) and hollow sections like (Round Pipes / SHS / RSH.) it is available in customized lengths, thus there is no need of any fabrication, cutting or welding at the site. Hence there is no material wastage or fabrication cost. It is also available in various thickness and sizes. The customers also have the option to buy high quality Galvanized Z purlins
TECHNICAL & MATERIAL SPECIFICATION
| Thickness | 1.5mm to 3mm |
|---|---|
| Length | Upto 12000mm |
| Material | CR Steel as per IS:513/HR Steel as per IS: 1079 |
| Yield Strength | 245 MPa to 345 MPa |
| Type | Galvanized purlins made of cold rolled coil with 70 GSM/ 80 GSM / 120 GSM /175 GSM/275 GSM coating as per customer requirement. |
TECHNICAL & MATERIAL SPECIFICATION
- Very high strength at low cost.
- Easy and low-cost handling and transportation.
- Economy due to reduction in dead weight on the main frame structure.
- Significantly reduce installation time.
- Ability to span long lengths.
- No site drilling or cutting required.
- Maintenance free owing to application of proper surface finish.
- Purlins are factory finished, cut to application of proper surface finish.
- Continuous splay and splicing for better structural strength, stability and economy.
- More than 40% saving in steel.
- More than 30% saving in overall construction cost.
This can be customized as per design and customer requirements.